Koppelings huis voor Triumph 5TA/T100/T120 enz.

-1964/1974

-Duplex , 58 tanden

-OEM 57-1570

Fits Triumph T140, TR7 (1973-80)

Number of Teeth: 58T
Chain Type: Triplex

Kickstart veer voor BSA A50 en A65.

Kickstart veer voor de STD bakken

Norton Kickstart spring to fit all singles and Twins (1954-62) with the AMC Gearbox.

Kickstart return spring Norton for all Norton Heavyweight twins (1962-75)

Triumph T90/T100 350/500cc kickstart return spring.

Fits all Triumph Twin unit construction 350/500cc models from 1957-1974.

Unit singles kickstart return spring.

Er zijn 2 types voor de Unit Singles

Kijk in uw onderdelen boek of dit het juiste nummer

Kickstart veer voor de BSA B en M serie.

stijfframe en plunger types

Triumph Kickstart Spring for Pre Unit Twins, and T120,T140,T150 etc Unit models.
Also fits BSA Rocket 3 models.

BSA A & B group, gearchange spring for Swinging arm models.
Fits A7,A10,B31,B32,B33,B34 etc

OEM: 67-3378

Kickstart pedaal voor Triumph.

Kickstart Crank for Triumph T120/T140/T150 Trident TR6/TR7 Unit models.

OEM: 57-3632 , 57-7018

Kickstart Crank Norton/AMC.

Fits AMC Heavyweight singles and twins, fitted with the AMC gearbox, and Norton Heavyweight singles and twins (pre Commando)

Norton Commando kickstart crank.

Fits MK1/MK2 750/850cc models (1968-74).
7/8" spline fitting , OEM: 06-1464

Borg plaatje voor de koppeling

Triumph T120/T140 en diverse BSA's

57-1046

Versnellingsbakdeksel pakking voor Triumph

Triumph Outer Gearbox Gaskets.
As fitted to Triumph 650,750cc Unit construction twins and T150 Triples (1963-).

Kickstart spie voor veel engelse motoren

3/8 inch dik (circa 9,5mm)

Plain Steel clutch plate .
Fits BSA 4 spring models, B31,B32,B33,B44 (1958-), A7,A10 Swinging arm models (1958-62), And the 3 spring models , A50,A65 (1966-72) and all Triumph Twin cylinder models (350,500,650,750cc etc)…

Gevoerde koppelingsplaat , BSA en Triumph.

-10 nokken

-binnen diameter 107 mm

-buitendiameter 153 mm

Niet Surflex wel goed.

Friction clutch plate for 4 spring clutch models
Fits BSA B31,B32 (1958-), B33,B34 (1958-), A7/10…

Set van 3 koppelings veren voor Triumph en BSA

Clutch Spring Set (Set of 3 springs) for Triumph BSA A50,A65 (1966-72),

and Triumph 650cc Unit construction models, with 3 spring clutch.

OEM: 57-1830,68-3288

-lengte…

Clutch spring for early 4 spring clutch models.(set of 4 springs)

Fits Triumph 3TA,5TA etc early Unit construction models, Pre Unit twins with 5 plate clutch, and BSA A & B Group models (1958-63), and also BSA A50,A65 (1962-66)…

Single sided friction plate with internal tabs.

Fits AJS/Matchless singles and twins (1959-) with AMC gearbox, and Norton singles and twins (1959-).
Internal spline.

Non Surflex

Double sided Fricton plate with internal tabs.

Fits AJS/Matchless singles and twins (1959-) with AMC gearbox, and Norton singles and twins (1959-).
Inside spline.non Surflex

Friction clutch plate for 6 spring models.
Fits BSA C10,C11 (1946-53),B31,B32 (1946-57), M33,B33,M20,B34 (1948-57), A7,A10 Swinging arm (1954-57),
M21 (1948-63).

Made in Italy by Surflex

Friction Clutch plate.
Fits BSA C10L, C11G, C12 with 3 spring clutch (1954-1958

OEM: 29-3476, 67-3242

Friction clutch plate.
Fits BSA C15,C25,B25 (1959-72),B40 (1961-66),B44 (1968-),B50 (1971-74) and Triumph TR25,T25T,T25SS (1968-72).

(Non Surflex)

Koppelings lagertje T150/T160 en Rocket III.

Triumph T150/T160 750cc 3 Cylinder Trident Clutch rod bearing. and BSA 750cc Rocket 3.

maat : 1/2 x 1 1/8 x 1/4 inch.

OEM: 57-3647

Triumph mainshaft T-1947/57-1947

22 tanden
Origineel Triumph , new old stock

​1964/1967 Triumph 3TA/5TA/T90 en T100

Triumph mainshaft , 57-2532

new old stock , 20 tanden

1970-71 All models T100 /T100R

Triumph mainshaft T-1822 , 57-1822

new old stock , 20 tanden

Close ratio T90 / T100

Spie voor de koppelings kern

Clutch woodruff key for BSA A50/A65 models and Triumph twins (1939-83).
Fits the gearbox mainshaft and prevents the clutch hub turning on the shaft.

lengte 5/8 , hoogte 1/4 en de dikte 5/32 (circa…

Triumph 5 speed (T140,T150,T160 etc) gearbox, sprocket lock washer

Triumph T90/T100, 350cc/500cc Unit construction,

kickstart stop plate.

7/8 inch buiten diameter

5 speed layshaft needle roller bearing, drive side for BSA Rocket 3 750cc,

Triumph 3TA,T21,T90 (1968-), 500cc/650cc pre Unit twins slick shift box,

5TA,T100,TR5 500cc Unit twins (1968-), T120,TR6,6T…

Layshaft needle bearing, timing side. BSA 750cc Rocket 3,

Triumph 500cc/650cc pre Unit twins slick shift box,

T120/T140 Unit twins,T150/T160 Trident models.

Made in England.

High gear Needle bearing (5 Speed) for BSA Rocket 3 750cc, Triumph T120/TR6/6T 650cc Unit twins, T140/TR7 750cc Unit twins, and T150/T160 Trident models 750cc.

-buitendiameter 27 mm

-lengte 22 mm

Kick shaft Needle Roller Bearing (Open ended).
As fitted to :-
BSA C15,B40 (1965-66) Kickstart Shaft
BSA C15,B40 (1967-) Kickstart and Layshaft
BSA C25,B25,B44,B50 Kickstart and Layshaft.
Triumph TR25W,TR25SS.

Made in…

Norton/AMC Gearchange lever with rubber (1956-74).

Fits Heavyweight singles and twins with an AMC gearbox, and Norton Dominator and Commando models

OEM: 06-1499, 04-1311, 04-0632

Triumph Gearchange lever to fit T120,TR6,TR7 and

T140 Unit Construction models (1969-75).
Also fits T160 Trident, but not the T150.

Keerring die in de grote ronde plaat zit achter de koppeling

bij de meeste Triumph modellen

Clutch back plate Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-67), High gear inner and Clutch back plate Oil seal for…

OIL SEAL - Triumph

Kickstart shaft to cover Oil seal for Triumph T120/TR6/T140 models (1963-82)and T150/T160 (1968-).

20 rolletjes 1/4 x 6mm

ROLLERS - Triumph/BSA/Norton/AMC

Clutch centre rollers for Triumph and BSA (Late A10-A50/A65 Models). 1/4" x 6mm.

Pijp sleutel voor Triumph T140 versnellingsbak tandwiel.

Tube spanner for Triumph 5 speed sprocket nut 1 7/8"

BSA Primary sliding plate for A7/A10 RGS and B31/B33 swinging arm models.

BSA A7/A10, B31/B33 Swinging arm slide Chaincase washer.

Large and small Clutch Cush Drive Rubber.

Fits BSA A50/A65 (1966-72) 3 spring models, and Triumph Unit construction twins with 3 spring clutches.

Passen maar matig , ik snij er meestal een plakje af.

Clutch Hub for Triumph T120/T140 and BSA A50/A65

Friction clutch plate.
Fits BSA Empire Star and M20 models
(-1947) with single spring clutch.

-binnendiameter 91 mm

-buitendiameter 125 mm

Borgplaat voor de BSA 6 veren koppeling

65-3822 CLUTCH LOCK WASHER

6x Veer voor 6 veren koppeling BSA

BSA Clutch spring for Six spring clutches as fitted to BSA A,B

and M Group models including :-
A7,A10 Swinging arm Pre-Unit twins (1954-59)
M20,M21 Series (1949-58)
B31,B32,B33,B34…

Triumph Primary Chain tensioner blade as fitted

to all early 350,500cc models (1958-)

Triumph primary chain tensioner blade.

As fitted to :-

Triumph T140,TR7 750cc unit construction twins models (1973-83)

BSA A&B Group Swinging arm models (1958-) with 4 spring clutch.
Triumph Pre-Unit 500/650cc Twins models with 5 plate clutch.

Number of Teeth: 43T
Chain Type: Single

BSA Clutch Outer Bearing Race - All Models Fitted with a 6 Spring Clutch

OD: 2+1/4" (57mm)
ID: 1+7/8" (48mm)
Height: 13/32" (10.2mm)

Made in EnglandOEM: 65-3912

Clutch thrust washer.
Fits Triumph TR6/T120 (1969-) and BSA A50/A65 3 spring clutch models.

-binnendiameter 51,5 mm

-buitendiameter 67 mm

-dikte 1,3 mm

GEARBOX FILLER CAP. BSA all unit singles chaincase A50, A65. Triumph T100, T120

-grootste diameter 30 mm

-draad diameter 25,4 mm

BSA M20,M21 W/D Clutch Centre Nut

Borg plaatje van de primaire vesnellingsbak as

Triumph Mainshaft lockwashers,for 3TA / T100 models.

2 x Triumph T120,T140,T150 gearchange quadrant return spring.

-2 stuks

SPROCKET SCREWS - TriumphSet of Gearbox sprocket cover plate screws (2BA x 6).As fitted to Triumph 350,500,650,750cc twin cylinder unit construction models (1958-83)Set of 6 screws!

BSA Lockwasher Set for A50,A65 models.

Kit includes :-
Gearbox sprocket 40-3121
Oil Pump 76-0138
Camshaft 67-0685
Kickstart Ratchet 68-3301
Crank shaft T/S 67-0644
Rotor Crank shaft D/S 68-0325

Clutch Tab Washers for T100, T120 Pre-Unit Twins,

and BSA 4 spring clutch models.

Triumph Lockwasher Set for 350,500cc Unit Twin models (1957-74).

Kit includes :-
Rotor Tab 70-3975
Gearbox Mainshaft Tab 57-2240
Gearbox Sprocket Tab 57-2056
Clutch lockwasher 57-1046

Triumph T120,TR6 Clutch nut and washer kit. Includes :-
Clutch Centre Nut (57-1047)
Clutch centre washer (57-2279)
Tab washer (57-1046)

Triumph Clutch Nut for many 4 speed gearbox models,

such as 5T,6T,T100,T120 and 4 speed BSA models.

Thread : 9/16" x 20TPI, CEI

BSA A & B group, swinging arm models high gear bearing.
Sunbeam 500cc S7/S8 Crankshaft bearing.

24-4065, 89-16

- 35 x 72 x 17mm

BSA A,B & M Group, Gearbox sprocket lockwasher

BSA Standard Gearbox Oil Seal. As fitted to

BSA A7/A10 Rocket Goldstar (1954-63) and

B31/B32/B33 swinging arm models (1954-60)

BEARING - BSA/Triumph/Ariel/Villiers

High Gear bearing T20 Cub,Cranshaft T/S T150/T160 early, Crankshaft D/S BSA 750cc Rocket 3 early,

Crankshaft T/S Goldstar,

Crankshaft 250cc Ariel Arrow/Leader,

Gearbox Villiers…

per 10 stuks

-diameter 3/16 inch (circa 4,7 mm)

-lengte 3/16

Pack of Clutch Rollers for BSA and Triumph Unit singles.
Also fits Villiers 9E,10E and 250cc A series engines.

All pre-unit Triumph models 500/650cc

(T100/T110/T120,3T,5T,6T), gearchange lever.

Bantam models crankshaft bearing,

Mainshaft BSA 500/600cc M20/21, A7/A10/A50/A65,

Camshaft Ariel 1000cc (1946-59),

Mainshaft R/Enfield Sunbeam S7/S8,

Mainshaft Triumph 350cc twin,500/600cc pre unit, T120/T140 Unit…

BSA A50/A65 (1963-73) Layshaft Needle bearing Timing side.
Also fitted to BSA A7/A10 Rocket Goldstar swinging arm models fitted with a RRT2 gearbox.

Made in Englandbuitendiameter 1 inch

Set van 3 veren

CL/SPRINGS T100 57-1560

Clutch Spring for late Triumph 350/500cc Unit construction models with 3 spring clutch.

BSA KICKSTART CRANK 42-3037

BSA A&B Group Swinging Arm Forged Kickstart Crank. OEM type with leaf spring top.
As fitted to A7,A10,B31,B32,B33,B34 models.

Triumph 4 Speed and Norton High Gear Bearing LJ31.7=1

BSA A50,A65 500/650cc (1963-73) Gearbox High gear,

Rocket 3 750cc Gearbox High gear 4 speed,

Norton ES2,16H,Mod 18,Big 4,19 (-1958),

Dominator, Model 7, Commando 750/850cc…

OIL SEAL 60-3512

T120/T140 etc 650/750cc 5 Speed Gearbox mainshaft high gear outer, into c/case (1972-83)

Gearbox high gear Oil seal for BSA A50/A65 (1962-73) and Triumph T120/TR6 (1963-72)

maten ongeveer 40 x 63,6 x 7,8 mm

NORTON COMMANDO AMC / LAYDOWN KICKSTART INNER BUSH . LAYSHAFT - 04-0146

3x CLUTCH SPRING 04-0358

Norton AMC Clutch spring for pre Commando models.
-lengte 45 mm

-binnen diameter 11,4 mm

-buiten diameter 16,6 mm

T120, T140 Kickstart pinion sleeve

-lengte 20,6 mm

-binnendiameter 19,4 mm

-buitendiameter 22,2 mm

3x rotor cover screws

-82-4129 / F4129

-2BA draad

-lengte draad 13 mm

-lengte totaal 15 mm

4 Boutjes voor het schakelpedaal van een Triumph T140

Gearchange Lever to fit BSA A50, A65, B25, B40, B44, C15(BSA Unit Single and Twins),

and Triumph T15, T20, TR25 Unit singles models.

Burman friction clutch plate.

Fits Ariel 4 Stroke Heavyweights (1936-58) with Burman gearbox, Panther Heavyweight Model 100/120 with Burman gearbox, and Vincent .

(GB versnellings bak)

Non-Surflex

Uit oude voorraad originele koppeling moer voor

BSA std 6 veers koppeling

-per stuk.

Komen uit de voorraad van een oude motorsloop in Engeland.

Triumph T100, T120 primary tensioner adjuster sleeve nut

As fitted to :-

Triumph 350,500,650,750cc Unit models (-1982)